To apply for freelance / full time positions with our Company please send your detailed resume in word format along with the scanned certificates to the following e-mail address:

As a minimum, he shall be a Diploma graduate, or equivalent. He shall be able to read, write and speak the English language. He shall have six (6) years inspection experience in manufacturing plants, including two (2) years of this inspection experience in the specific commodity and processes to be inspected. He shall be fully conversant with applicable Industry standards, specifications, and fabrication methods and shall perform a variety of inspection functions with minimal supervision as required to verify supplier compliance with the purchase order requirements. He shall be able to read engineering drawings. He shall have knowledge and understanding of ISO-9001 quality system requirements and implementation. He shall meet all additional minimum requirements for each specific inspection discipline, as follows:

Inspector shall be certified as an American Welding Society CWI, CSWIP 3.1 Certified Welding Inspector, or approved equivalent. Inspector shall have a demonstrated background and thorough knowledge of codes such as ANSI B 31.3, 31.4 and 31.8, ASME Section V and IX and AWS D1.1, required for the execution of the Work. Where Nondestructive Testing (NDT) forms part of the Work, and Inspector is required to review or ensure NDT programs and results, he shall have been previously qualified and certified to a minimum ASNT Level II in the relevant method(s). When performing, reviewing or ensuring Nondestructive Testing in VT, MT, PT, RT or UT, he shall be certified in the specific method(s). When performing, reviewing or ensuring Radiographic Testing Film Interpretation (RTFI), Inspector shall be certified in RTFI.

Inspector shall demonstrate working knowledge of codes as required by the purchase order, such as ASME Sec I, V, VIII and IX, ANSI B31.3/4/8, NACE, and API 620/650 and AWS D1.1, and witnessing Positive Material Identification test and knowledge of equipment required for the inspection of mechanical commodities such as pipes, piping, fittings, valves, structural steel, and fasteners,etc.

Inspector shall demonstrate a thorough working knowledge and proven ability of all phases and types coating applications and methods and recognized industry standards. For critical coatings per Saudi Aramco SAES “H” series, Inspector shall be additionally qualified to NACE Level II Critical Coatings Certification, CSWIP Level II, or equivalent.

Inspector shall demonstrate a thorough working knowledge of codes such as ANSI-A17.1 and 17.2, ANSI-B30.1 through B30.16, or equivalent standards.

Inspector shall demonstrate a thorough working knowledge of the National Electric Code/NFPA 70, IEC or equivalent standards. Where, inspection of Cathodic Protection equipment is required, inspection must be able to demonstrate a thorough knowledge of applicable requirements of NACE or equivalent corrosion standards.

Inspector shall have three (3) years documented experience in the field of instrumentation and control systems. He shall be familiar with the international Industry Codes and Standards related to Intrinsically Safe Systems and Electrical Systems for Instrumentation such as; ISA RP12.6, ISA RP12.2.02, ISA TR12., ANSI MC96.1, IEEE 518, IEEE 1100, IEC 60529, NEMA ICS 6, NEMA 250, NEMA VE 1, NEMA VE 2, NFPA 70/NEC and UL 94. As a minimum, he shall be able to inspect complete loop checking, wiring continuity, color coding, and start up. When required, he shall be able to evaluate Factory Acceptance Test and demonstrate a thorough working knowledge of international codes and standards related to packaged units instrumentation such as, Distributed Control System (DCS), Supervisory Control and Data Acquisition (SCADA) Systems, Remote Terminal Unit, and Emergency Shutdown (ESD) systems.

7. Rotating Equipment

He shall have minimum FOUR (4) years hands-on inspection experience of rotating machineries such as pumps, compressors, generators, turbines, gears and motors, including attending and assessing Factory Acceptance Test (FAT) and reporting dynamic, vibration and/ or high temperature problems.